If you own a car, it is your responsibility to maintain it properly. The first thing to keep in mind for car maintenance is the car’s AC condenser. You must manage this thing well and maintain it as well.
But many do not know how to clean car ac condenser. With that in mind, here are some tips that will help you make it easier. You can also visit autoevaly.com if you want to know more about car ac condenser or how to maintain it. Here you will find all the necessary information.
Which Tools are needed for this Task?
- Sockets
- Wrench
- Coil cleaner
- Spray bottle
- Wrench
You also need some other essential things like safety glasses, dust mask and a pair of rubber gloves. These items are needed to make sure that you have enough safety to do this task.
Latest update: updateperdana
10 Steps to Follow to Clean Car AC Condenser
Although cleaning AC Condenser is not a difficult task, you can never do it if you do not know what steps to follow. You must follow some important steps. You can do this yourself. You do not need to go to any service center for this. Let’s know the steps.
Step-1: At first make sure that there is no front bumper in your card. You should remove it from your car. To do this you need to remove a few clips and a few bunches.
Step-2: Second you need to use your wrench to remove some bolts to remove your bumper. You can then move the bumper. Then you will see the AC condenser of your car.
Step-3: Take some garbage bags and cover some area of engine bay near condenser
Step-4: Cleaning your car’s condenser is a challenge. If you have a soft bristle brush, you can use it to clean dirt from the AC condenser. You have to be very polite because the fins of the AC condenser are very soft. Make sure you turn off your car’s engine.
Step-5: Use coil cleaner spray to remove dirt and grease from your AC condenser. Shake the bottle and spray in AC condenser. After that it will foam up.
Step-6: Let it sit for five minutes. Then rinse with water and air dry. You can use the coil cleaner a second time and clean with water. Now it has been completely cleaned. Be careful. Do not wet other wires in the engine bay. This may cause a short circuit. Rinse until all detergent is clean.
Step-7: If your AC condenser has two parts. Then do the same cleaning process for the other part. If you have a compressor, you can use a blow gun and get some water out of the AC condenser.
Step-8: Now, it’s time to take out the garbage bag. After that, clean the area around the bumper and condenser before re-installing the bumper.
Step-9: You have been cleared. Reinstall the front bumper cover. Be sure to reconnect the fog lamp.
Step-10: Finally return the clips. Use your wrench to hold the screws back. Better to buy new clips and screws. Place the back of the bolt on the bumper cover. Your work is over now.
Read Also: How to Maintain Your Car
Final Thought
Cleaning an AC Condenser is not a difficult task, but you must follow some important steps. We have discussed all those steps in this article. We hope that this small effort of ours will help you enough to do this work.
Read Also: Click